Briffidi Pickleball Adapters for SW1

Thank you for purchasing a Briffidi Pickleball Adapter. If you need assistance, please check the support page or contact me at

Package Contents

  • Pickleball adapter (for 5 cm or 0 cm pivot location)

You Will Need

Get Started

  1. Level and calibrate the SW1 using the standard procedures (without the adapter).
  2. Mount the adapter into the cradle of the SW1 and tighten the strap.
  3. Take a measurement and activate the Tare button (filled when active) to zero out the adapter.
  4. Mount the paddle into the adapter and measure the paddle.

Check out the PA5 and PA0 catalog pages for additional information.